Kenwood programming software allows you to set frequencies and functions within your Knewood radio. Also know as Kenwood Cloning Software, this software is easy to use and runs on your PC under the Windows Operating System. You can set each channel's frequency and privacy codes, set functions for each programmable key on your radio, set parameters such as delay time for the Time-Out-Timer. Programming software to program TK7160 kenwood radio. Do you have any clue where i can download a free software for this radio kenwood 7160. Kenwood KPG-99xx programming software and cable for your TK-7160 is available from most Kenwood commercial radio dealers.
KENWOOD Radio Control Program ARCP-590 Version 2.02 Last updated: July 28, 2015 About this software This is the control software for the TS-590S transceiver. It is used to control the TS-590S via a PC. The transceiver data, such as the memory, the menu, and the Auto Mode frequency, can be edited and saved using a PC via this software, and the data can also be written to the transceiver. The TS-590S transceiver can also be controlled with the via a network. For the TS-590SG, please use the.
About virtual COM port driver needs to be installed onto the PC to use the ARCP-590 with a USB cable. ATTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver. Operating Environment 1. Operating System (OS) Windows Vista ® (Service Pack 2 or later) (32-bit) Windows ® 7 (Service Pack 1 or later) (32-bit or 64-bit) Windows ® 8 (RTM or later) (32-bit or 64-bit) Windows ® 8.1 (RTM or later) (32-bit or 64-bit) Note: This software is designed to run on the above operating systems. Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications. Processor Faster than the recommended CPU for each OS. System Memory (RAM) Larger than the recommended System Memory for each OS.
Free Hard Drive Space 100 MB or more of free hard drive space. Runtime Microsoft.NET Framework 3.5 (includes.NET 2.0 and 3.0).
Peripheral Devices A display with resolutions higher than XGA (1024 x 768). A keyboard and a mouse, or other pointing devices. USB 2.0 or RS-232C interface.
Note: If the transceiver is connected to a PC using a USB cable, ensure that the connection is directly in place. ARCP-590 may not behave properly if a connection is in place through a USB hub. Download and install the to make a USB connection possible for command communications via a USB connector. Following are the equipment and software that are required to enable voice communications to be transmitted and received by the transceiver which is connected to a PC using a USB cable.
ARUA-10 software. Sound function.
A microphone. Network function and available networking environment (LAN or high-speed broadband) is necessary when using the. A commonly-used VoIP software (such as a P2P telephony software) is separately required for making voice communications via a network. You are responsible for the selection and installation of the VoIP software and operation using the VoIP software. Usage Notes If you are remotely controlling the Transceiver using this software via a network such as the Internet, you must conform to the radio laws and relevant domestic laws of the country and/or area where the Transceiver and relevant equipment are installed.
If any problem occurs while you are remotely controlling the Transceiver and relevant equipment, the responsibility of finding a solution to the problem is left solely to the user who remotely control the Transceiver and relevant equipment. Users are required to obtain an approval from JVC KENWOOD Corporation, in writing, prior to redistributing this software on a personal web page or packet radio. Users are prohibited to assign, rent, lease, or resell the software.
Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software. JVC KENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVC KENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses.
Selection and installation of this software shall be made by the User's designation. The User shall take for the use and effects of this Software. JVC KENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a calling opportunity caused by a failure or performance error of this Software. JVC KENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software. The user shall be allowed to use, not to resell, the software by obtaining a license from JVC KENWOOD Corporation. While the media in which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVC KENWOOD Corporation.
Kenwood Radio Software Download
Installing the ARCP-590 Extract the downloaded file 'ARCP590202.zip' into a designated folder. In the designated folder, a folder labeled 'ARCP590202' will be created. Execute the 'Setup.exe' in the folder labeled 'ARCP590202', and follow the instructions that appear on the display to install ARCP-590. Note: Administrator privileges are required when installing the software.
To update ARCP-590, execute the same procedure as used for installation, and follow the instructions that appear on the display to install the software. The latest update is written and installed over the currently installed program. Uninstalling the ARCP-590 Select 'ARCP-590' in 'Uninstall a program' in the Control Panel and follow the instructions that appear on the display to uninstall the software. Or double-click 'Setup.exe', and follow the instructions that appear on the display to uninstall the software. Administrative privileges are required to uninstall ARCP-590. Always exit ARCP-590 before uninstalling the software. If you agree with the details listed above, click the following link to download the ARCP-590 software.
(The latest version includes all previous updates.) Update History Ver.2.02 (July 28, 2015) Adds the TS-590S firmware Ver.2.01 compatibility. Supports COM1 through COM256. Adds a setting value of 'Auto' for Baud Rate in the Tool - Setup dialog box. Ver.2.01 (April 13, 2015) Revises an error during remote-operation mode, when using certain non-English languages in the PC OS. Ver.2.00 (January 29, 2015) Adds the TS-590S firmware Ver.2.00 compatibility.
Kenwood Radio Programming Software Download
Adds Windows ® 8.1 compatibility. Ver.1.03 (December 06, 2013) Enables to select 'TX' or 'RX' from 'Tunable Frequency during Split TX' in the TX/RX pull-down menu.
Revised the help file. Adds Windows ® 8 compatibility. Ver.1.02 (September 26, 2011) Disables the pop-up message dialog box before logoff or shutdown of the PC. Revises the help file. Ver.1.01 (November 30, 2010) Revises the PC control command 'FT' processing for the TS-590S firmware Ver.1.01.
Ver.1.00 (October 15, 2010) First Release Windows Vista ®, Windows ® 7, Windows ® 8, Windows ® 8.1, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.NET Framework is a trademark or a registered trademark of Microsoft Corporation in the United States and/or other countries.